HOWTO: Reparieren der DSDT

diff -BruN linux-2.6.5/drivers/acpi/parser/psparse.c linux-2.6.5-hack/drivers/acpi/parser/psparse.c
--- linux-2.6.5/drivers/acpi/parser/psparse.c   2004-04-03 22:36:25.000000000 -0500
+++ linux-2.6.5-hack/drivers/acpi/parser/psparse.c  2004-04-26 09:54:02.148220528 -0400
1111,7 +1111,10 @@
          "Completed one call to walk loop, %s State=%p\n",
          acpi_format_exception (status), walk_state));
 
-      if (status == AE_CTRL_TRANSFER) {
+      if ((status == AE_CTRL_TRANSFER) ||
+          (status == AE_AML_NO_RETURN_VALUE) || 
+          (status == AE_AML_UNINITIALIZED_ARG) ||
+          (status == AE_AML_UNINITIALIZED_LOCAL) ) {
          /*
           * A method call was detected.
           * Transfer control to the called control method 

# Zeit in 5Sekunden-Schritten
AC_HD_WITH_LM=6
AC_HD_WITHOUT_LM=6
BATT_HD=6
 
# Shall we adjust the power management values on the hard drives?
DO_HD_POWERMGMT=1
 
# Hier ist bei Hitachi-Platten bei 127 oder 128 die Grenze zwischen Platte aus oder
# nur Köpfe parken und Drehzahl etwas runter
# Power management for HD (hdparm -B values)
AC_HDPARM_POWERMGMT_WITH_LM=130
AC_HDPARM_POWERMGMT_WITHOUT_LM=130
BATT_HDPARM_POWERMGMT=130
 
# The drives for which to adjust the idle timeout and power management settings.
# Separate them by a space, e.g. HD="/dev/hda /dev/hdb".
HD="/dev/hda"
 
# Set the spindown timeout on the hard drives?
DO_HD=1 

title Fedora Core (2.6.9-1.681_FC3)
        root (hd0,1)
        kernel /bzImage-2.6.9 root=/dev/VolGroup00/LogVol00 rhgb quiet
        initrd /initrd-2.6.9-1.681_FC3.img 

kernel /bzImage-2.6.9 root=/dev/VolGroup00/LogVol00 rhgb quiet 

kernel /boot/bzImage root=/dev/VolGroup00/LogVol00 rhgb quiet 

Booting Kernel
ACPI: unable to start the ACPI interpreter
audit (1103387465.900:0):initialized
 
Kernel Panic - not syncing: VFS: unable to mount root fs on unknown-block (0,0)